Home /; Bolts, nuts, washers /; Other theraded articles /; Grease Nipple /; Grease nipple straight DIN 71412-A. Grease nipple straight DIN 71412-A.

Hydraulic Grease Nipples according to DIN 71412 Standard Ingrassatori Idraulici a Norma DIN 71412 A Norma DIN 71412 e con filettatura conica 1:16 M7x1 9 70.02-ZB 70.02-ICH M8x1 9 70.03-ZB 70.03-ICH 70.03-OT-GR M8x1,25 9 70.04-ZB 70.04-ICH Codici in corsivo su richiesta soggetti a quantità minime di produzione se non disponibili

Hydraulic grease nipple Type H90° (H3) DIN 71412 They are small and inconspicious, but responsible for keeping machines and all kinds of equipment in motion - whether in a harvester in Russia, a pipeline in Alaska, or a brewery in Australia. There is a SANLI Grease Nipple for every application purpose in most sizes, types and composition.

Hydraulic grease nipple H45(H2) DIN 71412,zinc-plated steel SANLI hydraulic-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way. Due to their multi-purpose field of application, they are the most commonly used types of grease nipples.

Grease Nipples Hydraulic Type DIN 71412 In general, our hydraulic-type grease nipples according to DIN are made of steel, case-hardened, zinc-plated and passivated, and they are featured with a tapered thread. The head diameter is 6.5 (-0.2) mm /0.256″ – 0.008″. For safety reasons and in order to avoid abrasion wear, the standard demands

Type H1 Hydraulic-Type Grease Nipples - according to DIN 71412 - straight version A/180° - standard versions according to DIN are made of steel, case-hardened, zinc-plated and passivated - with tapered thread - for other types and materials, please see table, or upon request GW thread L1 overall length L2 thread length L3 shank length SW HEX size

Due to their multi-purpose field of application, they are the most commonly used types of grease nipples. VERSIONS. In general, our hydraulic-type grease nipples according to DIN are made of steel, case-hardened, zinc-plated and passivated, and they are featured with a tapered thread. The head diameter is 6.5 (-0.2) mm /0.256″ - 0.008″.

Metric Thread Grease Nipples. Standard: DIN 71412. Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13. Thread: Parallel , Taper. Sizes: As per below chart or as per customer requirement. Heat Treated Springs For increased Life. Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation.

Item description/product images. Show/filter all items. Description Material: Steel or 1.4305 stainless steel Version: Steel hardened, min. 550 HV 1, electro zinc-plated. Stainless steel

Hydraulic grease nipple HR (H1) Stainless DIN 71412. Type HR, straight version, stainless steel. UMETA hydraulic-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way. Due to their multi-purpose field of application, they are the most commonly used types of grease nipples.

Grease nipples conical head DIN 71412. Grease nipples conical head DIN 71412, Form C, 90°, hexagonal; Item description/product images: Description Material: Steel or 1.4305 stainless steel Version: Steel hardened, min. 550 HV 1, electro zinc-plated. Stainless steel bright.