9/28 · I have a '71. on mine half of the hinge is welded to the frame and the other is side is bolted to the door. Alignment is done on the door side of the hinge. It is easy to replace door pins and bushings with the front fenders off. And the fenders need to be off to adjust

4/23 · 1A Auto shows you how to fix your sagging and sloppy door hinges on your 88 to 98 Chevy or GMC Silverado Sierra Pickup Truck and 92 to 99 Suburban, Yukon ,

To fix a sagging door, you can either replace the whole hinge or just the pin and bushings. Usually all you'll need to do is replace the pin 

Step 2 - Remove Lower Hinge Pin Unless you have an engine hoist to hold the door in place or two other people helping you, you must change the hinge pins one at a time. Have another person or a support that will fit under the door as you work. Use a pin removal tool (approximately $20 on ) or a nail punch kit to remove the old pins.

Place a nail punch on the hinge bolt inside the door. While supporting the door by hand or with your support object, tap the hammer to push the nail punch into 

I wanted to just knock out the pins to remove the doors for paint but realized the top pin won't come out that way. I unbolted the hinge to remove the pins, drilled and tapped holes in one end, and then installed the top hinge pin upside down. The added screw in the threaded hole will keep the pin from ever falling out since it's upside down.

How To Replace Door Hinge Pin &, Bushing Kit 1988-2000 Chevy K1500 Why do hinge pins come out? Over time, the weight of a door can cause screws to pull out of their holes and

Buy Now!New Door Hinge Pin & Bushing Kit from 1AAuto.com http://1aau.to/ia/1ADMX00340If the door hinges on your truck are creaking, or the door is sagging, y

Using our NAPA punch set, we selected a drift pin that fit the hinge pin and drove it up with a a few blows with a hammer. Be careful not to hit 

Fleetline, Bel Air, 150 or 210's hinges back in tip top shape with a door hinge pin and bushing kit from Eckler's Early Chevy . 1949-1954 Chevy Door Hinge Pin And Bushing Kit .

How do I remove a bushing from a door? Tap the PinheadOut .Advertisements. CONTINUE READING BELOW You need to ram the hinge pin upward gently. You can also use a screwdriver's flat end to knock it out with the hammer. Tap the pin with gradually increasing force until the head of the pin lodges upward.