KOP-FLEX CANADA, LTD., 19 METEOR DRIVE, REXDALE, ONTARIO, CANADA M9W-1A3, 416-675-7144 Emerson Power Transmission 1.0 General Instructions Prior to installation, inspect the coupling for any signs of damage that may have occured during shipping. Check that all parts are on hand and are as ordered. ONLY BOLTS AND NUTS SUPPLIED BY KOP-FLEX ARE TO

Coat the sleeve teeth with coupling grease. Use a portion of the grease to coat the 'O' ring seals and install the seals into the groove of the Series H Sleeve, or the end ring of the Series HD coupling. MAINTENANCE and LUBRICATION For the Series H, place the coupling sleeves over the shaft end as shown in cover illustration.

10.1 KOP-FLEX® KD21 disc couplings are designed to operate for extended periods without the need for lubrication or maintenance. Visual inspection of the disc packs is suffi-cient to assess the operational condition of the coupling. 10.2 All machinery should be monitored to detect unusual or changing vibration levels. The KOP-FLEX ® KD21

To contact our experts about recertifying your Kop-Flex couplings, visit: https://www.regalbeloit.com/brands/kop-flex/coupling-recertification MCV20022E

Manufacturer Internal Number. 1962653. Weight / LBS. 1.42. Long Description. 5-11/16" Outside Diameter; Elastomeric Coupling Type; Element Assembly; Rubber; 1-5/8" Between Shaft Ends; 3-5/8" Width; 40 Size or Series; 4100 Max Speed; 725In-Lbs Torque. Distance Between Shaft Ends. 1.625 Inch | 41.275 Millimeter. Outside Diameter.

29/08/  · The KOP-GRID coupling, when under extreme loads, transmits the full load directly to driven equipment with the entire grid in full contact with the hub tapered teeth. The coupling

The Kop-Flex ® KD ® coupling product line was designed for pump, screw and reciprocating compressor applications. These high-value disc couplings are manufactured to finishes typically found on higher-cost offerings, providing simplified maintenance and best in class performance. Installation and maintenance are simplified by the use of

Kop-Flex. The Kop-Flex ® brand continue to innovate with industry-leading solutions such coupling-torquemeter systems and patented ground bearing technology. The strength of the

Installation and Alignment Instructions FORM 22-001 Revised FEBRUARY,2003 KD1 & KD10 Disc Coupling Figure 3. Hub Advance vs. Interference Chart KOP-FLEX, INC., P.O. BOX 1696, BALTIMORE MARYLAND 21203, 410-768-2000 KOP-FLEX CANADA, LTD., 19 METEOR DRIVE, REXDALE, ONTARIO, CANADA M9W-1A3, 416-675-7144 Emerson Power Transmission ® Figure 1.

2.0 Installation of Coupling Hubs - Keyed Mounting 2.1 Check the hub bore and shaft for nicks and burrs, dress if necessary. Make sure that the bore and shaft are clean. 2.2 For tapered bores, check the fit of the bore to the shaft. 2.3 Keys must be precisely fitted to the keyways in the shaft and hub.

P. and/or Kop-Flex, Inc. INSTALLATION and ALIGNMENT INSTRUCTIONS These instructions generally apply to Forged Steel, Model B, and Cast Steel couplings. For modifications and varia- tions of these couplings, this sheet may be supplemented by Special Instruc- tions supplied with the couplings. AL- WAYS use caution when working on rotating equipment.